Error getting error code 0xc000000e (your PC needs to be repaired) during startup after upgrading Windows 10 1903? Or sometimes Windows 10 won’t start with error code 0xc000000e after installing a new game or third-party application or installing new hardware. Your computer needs to be repaired. This error indicates a hardware failure, incorrect drive configuration, or corrupt startup configuration data. If you are also struggling with error code 0xc000000e, do a startup repair and recreate the boot configuration data from advanced options. Most likely, fix the problem.

Windows 10 startup error 0xc000000e

Disconnect all USB devices from the computer and, if possible, disconnect any other hard drives. Then pull out the power plug and remove the battery. Press and hold the power button for 30 seconds, then reconnect the power cord, and then try again. Check if this contributes to normal booting.

Note: The window does not start normally. To perform troubleshooting steps, Windows must be started from the installation media to access advanced options and perform the Startup Repair and rebuild the startup configuration information. If you don’t know how to create Windows 10 installation media from here.

Run the automatic repair

When you’re done with Windows 10 installation media or UBD, put those on your PC. Now, follow these steps to access advanced options and do a Startup Repair that will prevent Windows from starting normally while scanning and fixing issues.

Force restart Windows and wait for the manufacturer’s logo to activate the option for the start menu. Usually, this is F12.

Restart the computer. When the manufacturer’s logo appears, press and hold the Start Menu option button to enter the Start menu and change the Startup option to CD DVD ROM or Removable Disk (if you are bootable via USB).

A black screen will appear with the gray text “Press any key to boot from CD or DVD”. Press any key.

Choose the right time and type of keyboard.

Click Repair Your Computer in the lower-left corner

This will scan and detect problems that are preventing Windows from starting normally.

During the startup repair, corrupted files or botched configuration settings of your system are diagnosed and attempts to fix them.

Wait for the scanning to finish. This will automatically restart Windows and start the computer normally.

UseRecreate the startup configuration data

If after the boot repair you still get the same error, now is the time to look at the BCD (Boot Configuration Data). As mentioned earlier, the main reason behind this 0xc000000e error is invalid or corrupted BCD (Boot Configuration Data) configuration. Follow the steps below to rebuild the boot configuration file.

Access the advanced startup options again and select Command Prompt.

If asked for a password, enter the current user login password and click OK.

Windows will restart and you will see a command prompt.

Enter the following commands sequentially, and press Enter after each

After that, restart Windows and check if there are no more startup errors 0xc000000e while Windows is starting.

Start Windows in Safe Mode

If the above solutions didn’t fix the problem, start Windows in Safe Mode. This will start your PC with the minimum system requirements, startup programs, add-ons, etc. have not loaded, and troubleshooting steps can be taken to resolve startup error 0xc000000e.

Access advanced options again,

Click Startup Settings, and then click Restart.

You will see a list of options. Choose F4 to start your PC in Safe Mode.

If you need to use the internet, choose 5 or F5 for Safe Mode with Networking

If your PC starts in Safe Mode, try the troubleshooting steps below.

Repair damaged system files

When Windows system files are damaged or missing, a startup failure can occur, error 0xc000000e . Run the DISM command and System File Checker utility which can detect corrupted files and restore them with the correct ones.

Search for cmd when searching in the start menu,

Right-click on Command Prompt and choose Run as administrator.

First, run the DISM RestoreHealth command: DISM / Online / Cleanup-Image / RestoreHealth

After this command run sfc / scannow and hit enter .

Restart Windows after the scanning is 100% complete.

Check if the computer started normally with no error 0xc000000e this time

Deactivate the quick start function

Find and select Power Options.

In the left menu, click Choose what the power button does.

Click the Change settings that are currently unavailable link.

Under Shutdown Settings, find Turn on fast startup (recommended).

Remove the checkmark next to this entry and click Save Changes.


Write A Comment